Follow @ASM_Educational The Trunk port between the router and switch had to be manually configured using sub-interfaces. Note, however, that the DATA vlan traffic and the phone VOICE vlan traffic for each host is carried over the same link (multiple vlan traffic over the same port).
Posts Tagged: router
Follow @ASM_Educational Build the following topology in packet tracer. After testing our configuration, we will deploy on devices.
Follow @ASM_Educational Cisco CCNA- How to Configure Multi-Layer Switch Layer 3 Switch Now that we have seen how a “router on a stick” works, we can introduce the Layer 3 switch. In the “router on a stick” topology, what if we could bring the router inside the switch?
Follow @ASM_Educational Using DHCP Server with Inter-Vlan Routing (Router on stick) On Last Video we talked about the router on stick that is we made sure that client from Network 10.10.10.0 can communicate with Network 22.214.171.124
Follow @ASM_Educational Setting up VLAN’s On a new switch, all the ports are in VLAN 1 by default. We just plug in the Ethernet cables and the devices can communicate. Furthermore, all the ports are in the up/up (administratively up) mode.
Follow @ASM_Educational Cisco CCNA-Router on Stick Inter VLAN Communication (Router on Stick) Earlier we built and tested the following topology:
Switches connect computers together in a LAN.
Follow @ASM_Educational Get our complete tutorial in PDF To Find out if link is up and has Ip address Router#show ip int brief