Posted filed under CompTIA A+, MICROSOFT MTA O/S.

Random Access Memory (RAM) types include SDRAM, DDR, DDR2, DDR3, RDRAM and SODIMMs.
Example of DDR3-800 data transfer calculation: 800 MT/s x 8= 6,400 MB/s. Dual channel is double width, 128-bit bus. Latency measured as CL or CAS.



Alternatively referred to as main memory, primary memory, or system memory,Random Access Memory (RAM) is a hardware device that allows information to be stored and retrieved on a computer. RAM is usually associated with DRAM, which is a type of memory module. Because information is accessed randomly instead of sequentially like it is on a CD or hard drive, the computer can access the data much faster. However, unlike ROM or the hard drive, RAM is a volatile memory and requires power to keep the data accessible. If the computer is turned off, all data contained in RAM is lost.


[bs_icon name=”glyphicon glyphicon-exclamation-sign”] Tip: New users often confuse RAM with disk drive space. See our memory definition for a comparison between memory and storage.




Types of RAM

Over the evolution of the computer there have been different variations of RAM. Some of the more common examples are DIMM, RIMM, SIMM, SO-DIMM, and SOO-RIMM. Below is an example image of a 512MB DIMM computer memory module, a typical piece of RAM found in desktop computers. This memory module would be installed into one of thememory slots on a motherboard.



Additional information

As the computer boots, parts of the operating system and drivers are loaded into memory, which allows the CPU to process the instructions faster and speeds up the boot process. After the operating system has loaded, each program you open, such as the browser you’re using to view this page, is loaded into memory while it is running. If too many programs are open the computer will swap the data in the memory between the RAM and the hard disk drive.


Source By:<>
To Become Cretified For CompTIA A+ Please Visit This Link ;


Also published on Medium.

Comments are closed.