Posted filed under CompTIA A+, CompTIA Network+, MICROSOFT MTA NETWORKING, MICROSOFT MTA O/S.

 

ComputerCableStore

 

When talking about cable pinouts we often get questions as to the difference in Straight-through, Crossover, and Rollover wiring of cables and the intended use for each type of cable. These terms are referring to the way the cables are wired (which pin on one end is connected to which pin on the other end). Below we will try shed some light on this commonly confused subject.

 

Straight-Through Wired Cables

Straight-Through refers to cables that have the pin assignments on each end of the cable. In other words Pin 1 connector A goes to Pin 1 on connector B, Pin 2 to Pin 2 ect. Straight-Through wired cables are most commonly used to connect a host to client. When we talk about cat5e patch cables, the Straight-Through wired cat5e patch cable is used to connect computers, printers and other network client devices to the router switch or hub (the host device in this instance).

 

 Connector A Connector B
 Pin 1 Pin 1
 Pin 2 Pin 2
 Pin 3 Pin 3
 Pin 4 Pin 4
 Pin 5 Pin 5
 Pin 6 Pin 6
 Pin 7 Pin 7
 Pin 8 Pin 8

 

Crossover Wired Cables

Crossover wired cables (commonly called crossover cables) are very much like Straight-Through cables with the exception that TX and RX lines are crossed (they are at oposite positions on either end of the cable. Using the 568-B standard as an example below you will see that Pin 1 on connector A goes to Pin 3 on connector B. Pin 2 on connector A goes to Pin 6 on connector B ect. Crossover cables are most commonly used to connect two hosts directly. Examples would be connecting a computer directly to another computer, connecting a switch directly to another switch, or connecting a router to a router.Note: While in the past when connecting two host devices directly a crossover cable was required. Now days most devices have auto sensing technology that detects the cable and device and crosses pairs when needed.

 Connector A Connector B
 Pin 1 Pin 1
 Pin 2 Pin 2
 Pin 3 Pin 3
 Pin 4 Pin 4
 Pin 5 Pin 5
 Pin 6 Pin 6
 Pin 7 Pin 7
 Pin 8 Pin 8

 

Rollover Wired Cables

Rollover wired cables most commonly called rollover cables, have opposite Pin assignments on each end of the cable or in other words it is “rolled over”. Pin 1 of connector A would be connected to Pin 8 of connector B. Pin 2 of connector A would be connected to Pin 7 of connector B and so on. Rollover cables, sometimes referred to as Yost cables are most commonly used to connect to a devices console port to make programming changes to the device. Unlike crossover and straight-wired cables, rollover cables are not intended to carry data but instead create an interface with the device.

 

 Connector A Connector B
Pin 1 Pin 1
Pin 2Pin 2
Pin 3Pin 3
Pin 4Pin 4
Pin 5Pin 5
Pin 6Pin 6
Pin 7Pin 7
Pin 8Pin 8

 

 

Want more information on how to become CompTIA A+ Certified? Learn more!

 

 


Also published on Medium.

Comments are closed.